Episode 358 | Degradable LCM
27 min
There are a few cases where you want to remove lost circulation material after drilling. Justin and Matt talk about materials, removal methods, and use cases.
Better Fluids Equal Better Wells.
27 min
There are a few cases where you want to remove lost circulation material after drilling. Justin and Matt talk about materials, removal methods, and use cases.
27 min
We just want the plastic viscosity to be as low as possible, right? Well, there's more to it. Justin and Matt discuss.
27 min
What are the implications for well life when we rush to get a well to TD? Justin and Matt discuss factors where a poor installation leads to issues with well life later.
The newest 50 of 259 episodes
27 min
There are a few cases where you want to remove lost circulation material after drilling. Justin and Matt talk about materials, removal methods, and use cases.
27 min
We just want the plastic viscosity to be as low as possible, right? Well, there's more to it. Justin and Matt discuss.
27 min
What are the implications for well life when we rush to get a well to TD? Justin and Matt discuss factors where a poor installation leads to issues with well life later.
39 min
The oilfield uses a lot of globally sourced materials, and that requires moving them around. Justin and Matt talk ocean freight and the factors tied to rising costs.
28 min
What is driving rail costs? How does it impact product logistics? Justin and Matt run through some of the latest figures and factors.
28 min
Trucking rates continue to rise. Fuel is part of it, but Justin and Matt break down several other factors that make getting materials to the rig more challenging.
36 min
What are the common characteristics of weight material? Justin and Matt talk barite and a few other materials.
40 min
How do you rate performance? By well? By pad? By area? Justin and Matt discuss the application and limitation of drilling fluid performance benchmarks.
32 min
Get ready for a word salad! Justin and Matt run through wellbore stability terms and break down why it's so challenging to develop accurate models.
43 min
There are a lot of purported reasons to use a base oil, but how do those claims stack up? Justin and Matt try to break down how base oils are chosen.
24 min
What is kill mud? Justin and Matt discuss its use and some considerations for mixing and storage
14 min
The extremes of drilling can make fluids compress under pressure and expand at high temperature. How does that work and what's the impact?
35 min
Why all the talk about liquefied natural gas lately? Justin and Matt discuss how new gas terminals have the potential to put a few more mud engineers to work.
22 min
When it comes to drilling fluid, how low can you go? Justin and Matt discuss low density options.
8 min
Why do we sometimes drill our surface interval with a different rig? Tune into this episode of The Flowline as Justin and Matt discuss the drivers to use a spudder rig for the first portion of the well.
14 min
We have a great question from LinkedIn – a listener asked Justin and Matt for their perspective on an article. Tune into this episode of The Flowline as Justin and Matt break down their approach to a record-breaking vertical well.
22 min
Open or closed? The question might be easier when it comes to your office door, but what about Open vs. Closed Loop Systems? Join Matt and Justin as they break down the basics on this week’s episode of The #Flowline
33 min
What are the factors that go into cuttings transport? Listen in as Matt Offenbacher and Justin Gauthier discuss the intricacies of hole cleaning.
13 min
Mud chillers do some important things, but what fluid properties work best with them? Justin and Matt discuss the difference between fluid for best thermal properties and best drilling properties.
27 min
What fluid properties allow you to drill the fastest? Justin and Matt talk about what makes clean mud, among other things, great for fast drilling.
22 min
What’s the deal with calling the endpoint of your chloride titration? What’s the chemistry behind it and why do we need to get it right?
19 min
What are cross-linked fluid loss control pills? Why don’t we see them more often in drilling applications? Matt and Justin discuss how they work and what it takes to deploy them.
16 min
Why is lime so important for invert emulsion systems? Justin and Matt run through how lime works with emulsifiers and provides alkalinity.
24 min
Spontaneous potential? Join Matt and Justin as they tackle a listener’s request and explore how fluid affects downhole logging operations.
23 min
Why do we always feel the need to try new things and change our current products? How do we decide which alternative products to explore and which ones to resist the temptation of?
21 min
When do you really need acid soluble materials? Matt and Justin talk about when these materials can help and when they probably just make us feel good.
20 min
When you’re talking loss circulation and loss prevention materials, how do you measure and describe the size of the blend? Justin and Matt break it down.
26 min
Is there a clear way to define if a drilling fluid additive is environmentally friendly? Justin and Matt shed some light on how to be data-driven regarding the environment – and why it’s so difficult.
24 min
Calcium carbonate is a common drilling fluid additive. What makes it so useful and how is it used?
27 min
Episode 203 | Directional Indirection with LCM
17 min
What happens when you get sodium chloride with your calcium chloride internal phase? Justin and Matt break down the two-salt titration and why you need it.
44 min
Join Matt and Justin as they explore the oilfield’s current supply chain challenges. Discover the impact of global economic trends on product availability and investigate whether decreasing oil prices could lead to lower prices for drilling fluids.
27 min
Listener Request! Justin and Matt discuss the basics of dewatering and how it enhances solids control performance.
46 min
Matt and Justin spill the tea on their experience at last week’s AADE National Technical Conference in Midland. They give our listeners insights into drilling technologies, induced seismicity, and drilling fluid automation. In addition, they discuss the fantastic networking opportunities, the involvement of students from across the country, and AES’ unforgettable afterparty attended by people from all significant O&G basins!
37 min
In this episode, Justin and Matt talk to Christian Grimes, a graduate student at Colorado School of Mines headed to the “real world” of drilling. Christian shares his story and outlook on the future of the oilfield.
39 min
Conferences offer a lot of opportunities to meet people and learn a few things. Justin and Matt break down different types of conferences, how to prepare, and why you might want to attend.
24 min
What is a specialty product? Are they really all that special? Justin and Matt break down the ups and downs of using products that your mud company didn’t make when they’re on location.
18 min
Loss categories vary, and perhaps one of the most subjective is evaporation. When does drilling fluid evaporate? Why is it so hard to measure? Justin and Matt discuss.
18 min
What’s casing drilling and what problems does it solve? What impact can casing drilling have on drilling fluid properties and selection? Justin and Matt discuss…
20 min
Sometimes, mud and tools interact and create issues. Other times, directional companies make absurd claims. And Matt and Justin don’t like it.
19 min
Drilling surface hole is often overlooked because it happens so fast…or at least it should. Matt and Justin discuss the typical and not-so-typical fluid challenges.
15 min
What is pH anyways? Justin and Matt run through the basics and how they apply to drilling fluids.
18 min
Bentonite or gel is used to drill almost every well. Matt and Justin run through the basics of this versatile drilling fluid additive.
39 min
We came across a breakdown of wells costs put together by Richard Spears on LinkedIn. In this episode, we talk about all those cost factors. Is drilling mud that expensive after all?
18 min
It got really cold in Houston recently. Matt grills Justin on how they stay warm on Canadian rigs and what to look out for on rigs in locations where it doesn’t get cold very often.
27 min
Old habits die hard. What are some traditional views and methods in the fluids domain that might hold us back?
4 min
Happy Holidays from the Flowline! Matt and Justin share their holiday wishes and thanks to our listeners for their listening loyalty!
–
0 ratings from members
Rate this podcast
Log in to rate and review the shows you listen to.
No reviews yet — be the first member to rate "AES Drilling Fluids".
This podcast, its content and its artwork are not owned by, affiliated with, or endorsed by Castquire.
Keep listening
Up next