Skip to content
Dental School Notes! cover art

Je$$ie

Dental School Notes!

A Courses and Education podcast

Good podcast? Give it some love!

All episodes

DPH Final exam

37 min

Dental public health exam, all about SDOH and insurance stuff yay

Operative: ICDAS and Radiographic Assessment

4 min

Radiographic assessment categories (RL = radiolucency) RA → initial stages RA 1: RL outer ½ of enamel RA 2: RL inner ½ of enamel +/- EDJ RA 3: RL limited to outer ⅓ of dentin RB → moderate RB 4: RL reaching middle ⅓ of dentin RC → extensive RC 5: RL reaching inner ⅓ of dentin, clinically cavitated RC 6: RL into pulp, clinically cavitated Visual: Lesion Severity → ICDAS ** to eval a lesion, eval: periphery demin and shadowing 0 = sound surfaces no evidence of visible caries after air drying 1-2 = initial caries first distinct changes in enamel = white spot lesion and/or brown various discoloration no evidence of surface breakdown/underlying shadowing in dentin 3-4 = moderate White or brown spot lesion w/ localized enamel breakdown without visible dentin exposure = 3 WITH underlying dentin shadow = 4 5-6 = extensive A distinct cavity in opaque or discolored enamel without visible dentin Guiding Principles of Carious Tissue Removal to retain tooth and pulpal health as long as possible = AIM Preservation of dental tissues → non demineralized and remineralizable Avoidance of pulp exposure Provision of sound cavity margins to achieve an adequate peripheral seal Controlling the lesion and inactivating remaining bacteria Reversible vs irreversible pulpitis; pulpal inflamm/pain Reversible Pulpitis = instances where the inflammation is mild and tooth pulp reminds healthy enough to save Normal responses to: thermal tests EPT Patients may experience pain/sensitivity Irreversible pulpitis = may experience pain without action to induce pain, sensitivity, and throbbing Cause of pulpal inflammation active caries = mild/severe Cavity preps = mild/severe dental materials = mild/transient Pulpal pain Intra-pulpal pressure on nerve endings secondary to an inflammation response w/ absence of inflammation = Hydrodynamic inflammation Pulpal protection When does the pulp need protection? Full crown preps cervical dentin exposure due to erosion caus...

Operative: Class III Prep and Resto

13 min

Class III Composite steps: Acid etch → rinse & dry Prime → air dry Adhesive → cure w/ 18J light Place composite & cure after each increment A2D = dentin A1E = enamel Pull-through = lingual → facial Cure F and L Finish and polish Finishing = shaping, contouring, and smoothing the resto Polishing = imparts the shine/surface luster Contouring Proximal Mesial surface → medium-orange SOFLEX disc @ 4500 RPM Gingival embrasures → no. 12 blade remove small amounts at a time to avoid chipping Blade dulls quickly Contouring Lingual Carbide football/egg to remove → excess and contour lingual @ FG 6000 RPM Carefully use SOFLEX disc if needed @ margins Contour, finish, and polish from composite TOWARD the tooth avoid forming flat/concave contours in resto/tooth structure Polishing cups order Green → blue → grey (no water) Green = Jiffy Polisher removes roughness left by diamond bur Blue = Gloss Plus Polisher further smooth the resto Grey = HiLuster Plus obtain high gloss

Operative: Class IV Prep and Resto Summary

9 min

Class IV = interproximal lesion of anterior tooth Incisal edge is involved Fracture (trauma) secondary caries rampant caries Shade selection: Clean tooth w/ flour of pumice & view patient at EYE LEVEL Proper lighting: under multiple light sources. Natural light is best Environmental factors: remove bright colors from field of view. Bright clothes, make up, gloves, neutral operators walls, etc Shade selection = made quickly to prevent eye fatigue made at BEGINNING of appt (tooth hydration) BEFORE RD placement Polychromatic technique eshethic restorative materials must blend into natural dentition by stimulating: color translucence form texture of teeth RBC come in Many shades and various opacities to match shade and translucency on both enamel and dentin Combo of optical properties from enamel and dentin provides the final appearance of normal tooth structure Optical properties are modified by: age Thickness of tooth tissue degree and quality of calcification Unworn dentition: dentin provides chroma, opacity, and fluorescence enamel modifies the appearance of dentin with translucency and opalescence Based on optical properties, RBCs contain three types of materials: Dentin-like: simulates dentin’s optical properties Enamel-like: simulates enamels optical properties Translucent-like: simulate translucent areas of the teeth As you get older = more chroma → more dentin as you age Class IV RBC Field Control R Dam: first premolar to first premolar (#5-#12) Place retainer W2A on either #5-#12 and retain other tooth w/ floss Matrices Anterior → Mylar strips Posterior → tofflemire, metal matrix bands, sectional matrix Bevel of enamel margins: Facial = 2.0-3.0 mm (esthetic bevel) lingual = 1.0 mm (partial thickness gingival = 1.0 mm (partial thickness) Settings for Bevel: Fine (red) flame-shaped diamond bur @ FG 100,000 RPM Blend w. Dark orange SOFLEX disc @ FG slow speed 4,500 Contact incisally located at HOC of adjacent tooth 1-2mm wide inciso-ging...

Operative: Mechanical and Physical Properties of RBC

35 min

Performance can be evaluated by failure mechanism Deformation → mechanical stress fracture → mechanical stress corrosion → chemical action wear → removal by solid erosion → removal by liquid  To reduce local stresses: Multiple simultaneous contacts occlusal forces distributed over larger SA Abrasion vs. attrition  Abrasion → shear force  Softer organic resin matrix = preferentially worn BEFORE harder filler particles  Attrition → direct contact force  Resin matrix and harder fillers are lost TOGETHER  Cracks occur in resin matrix due to occlusal stress  Types of Stress → Deformation  Stress (Pascal, Pa)  internal resistance of a material to an external load  resistance is dependent on the surface area which the load was delivered  SA = more important than the force  Both the applied force and stress are distributed over an area of the body  In dentistry, Occ. forces applied over small areas (cusp tip) → produce very high stresses  Strain  Deformation a body undergoes when a stress acts upon it  measured as a net change in the length of a material following the application of a load  deformation depends on the type of stress  you want ELASTIC deformation = not permanent (plastic)  Modulus of Elasticity (E)  Ability to sustain deformation without permanent change in size or shape; stiffness of material within the elastic deformation  the slope of the linear region of the curve corresponding to 0-A on the Stress-strain curve  ratio of stress to strain (E = stress/strain)  Higher modulus of elasticity = more force required for deformation to happen  COMPOSITE MODULUS OF ELASTICITY = most similar to dentin  Fracture toughness ability to plastically deform w/out fracture materials ability to resist to the propagation of a crack higher fracture toughness =  lower rate of bulk fracture, marginal degradation, and surface wear  There is an optimal level of filler % for fracture toughness = more is not necessarily better but...

Operative: Intro to Carious Lesions & Tissue removal

31 min

Guiding Principles of Carious Tissue Removal  to retain tooth and pulpal health as long as possible = AIM Preservation of dental tissues → non demineralized and remineralizable  Avoidance of pulp exposure  Provision of sound cavity margins to achieve an adequate peripheral seal  Controlling the lesion and inactivating remaining bacteria  Reversible vs irreversible pulpitis; pulpal inflamm/pain Reversible Pulpitis = instances where the inflammation is mild and tooth pulp reminds healthy enough to save  Normal responses to: thermal tests EPT  Patients may experience pain/sensitivity  Irreversible pulpitis = may experience pain without action to induce pain, sensitivity, and throbbing  Cause of pulpal inflammation active caries = mild/severe Cavity preps = mild/severe  dental materials = mild/transient  Pulpal pain Intra-pulpal pressure on nerve endings secondary to an inflammation response  w/ absence of inflammation = Hydrodynamic inflammation  Pulpal protection When does the pulp need protection? Full crown preps  cervical dentin exposure due to erosion causing pain  Presence of mechanical pulp exposure  after selective Caries removal that have led to medium or deep cavity preps  Why must we protect the pulp? Preserve pulpal vitality avoid thermal sensitivity (pain) after restos  Avoid removal of sound structure to provide resistance to resto material (amalgam/gold)  How to protect pulp  eliminate progression of carious lesions  collect appropriate information regarding pulpal health before doing restos  Using appropriate cutting instruments, use water during prep, no water during caries removal  selecting/applying appropriate biological and mechanically resistant dental protective materials  Protective materials = provide a protective coat for freshly cut enamel/dentin  Cavity liners  Cement/resin coating of minimal thickness (0.5mm) Physical barrier to bacteria and their products  provides therapeutic benefit = F- r...

Operative: Class Vs and Sandwich Techniques

14 min

CLASS V steps (summarized) Access → 330 FG Peripheral cavity removal w/ round #2 Round #6 or spoon excavator used for pulpal/axial walls *** using a larger bur  = removes less tissue  Outline form → 330  Caries removal is first done @ periphery and along DEJ  do until we see clean DEJ!  Explorer used for → assessment of surface texture only  be careful in deeper areas to not damage pulp  do not use in axial area When material has set, excess is shaved away w/ → No. 12 surgical blade  Contoruing/finishing = use hand instruments as much as possible while preserving smooth surface  If you use rotary instruments = DO NOT DEHYRDRATE SURFACE OF RESTO  Goals of Caries Removal in the Prep: Axial wall → selective removal to FIRM DENTIN Periphery walls (O,M,G,D) → Hard dentin DEJ  Occlusal and Gingival walls → parallel to slightly divergent  M and D walls → divergent  Margin (Butt joint margin) → NO bevels. Smooth margins and walls.  Sandwich Tech Lecture Full thickness bevel → all the way to DEJ  Partial thickness = not entire enamel GI or RMGI Dentin replacement = GIs similar thermal conductivity and coefficient of thermal expansion Fl release= takes place at setting rxn, the initial release is high and decreases with time Chemical bonding to dentin  Why RMGI? Superior mechanical properties than GI Can be contoured and polished v similar to RBC  Stronger in acidic environment = don’t want it to erode easily  Conventional GI = poor maintenance of anatomical form  Conventional GI suffers rapid surface degradation  Conventional GI doesn’t present optimal esthetics = not easy to polish  Sandwich technique = layers of GI (conventional or RM) between dentin and perm restorative material (resin composite or amalgam)  Overall Indications of Close Sammy Technique Pulp protection selective Caries removal preparation extends very close to pulp Fl-release promotes affected dentin remin Remaining enamel at the gingival margin better bon...

Dental Anatomy 3: Lobes, Cusps, Inclinations, & more

35 min

Occlusal Curvatures and axial positions  Curve of spee: 2d curvature = buccal cusp tips of premolars and molars posteriorly, curvature begins @ tip of canines and curves upwards from anterior → posterior  Max molar roots = inclined MESIALLY Mandi molar roots = inclined DISTALLY  Curve of Wilson: the medio-lateral curvature of the occlusal plane of posterior teeth → complements the paths of the condoles during mandible movement  Also 2d  Crowns of MANDI posterior teeth incline to the lingual (Lingual Lower) Crowns of MAX posterior teeth incline toward buccal (Buccal Upper)  Molars have greater inclination bc the curve  → deeper posterior  Sphere of Monson AKA compensating occlusal curvature = 3d sphere shaped curvature for occlusal plane Concave curve for mandi, convex for maxillary = combo of curve and spee and curve of Wilson Axial position/Root inclination Axial position = the inclination of a tooth from vertical axis  Normally described in mesiodistal and faciolingual direction (but a combo of the two) = opposite of BULL Crown is normally inclined in the OPPOSITE direction = BULL Crown surface form  From facial/lingual aspects ALL permanent teeth = rougly trapezoidal  Tooth  Shape of Crown Info Anterior Tringular  Proximal view → triangular  Base = cervical 3rd Apex = incisal 3rd Apex = wedge in tearing, biting, and incising food Max posteriors Trapezoidal  Proximal view → trapezoidal  Base = cervical  Wedge → aids in distribution of forces during mastication and self-cleaning process Mandi posteriors Rhomboidal  Proximal → rhomboidal  Crowns = inclined toward the lingual  = proper interlocking of the Mandi and max posterior teeth during mastication  Contact areas Increase in size with age = Abrasive contact in proximals broaden the area  Mesiodistal length of dental arches = get shorter = as teeth become narrower mesiodistally, they are moving closer to midline  Proper contact location = stabilizes d...

Dental Anatomy 2: Dental Formulae, Arches, & Eruption Patterns

9 min

Dental formula  A dental formula = indicates the dentiiton of only 1 side of the mouth but includes both MAX and MAND. Quadrants.  Must be multiplied by 2 to provide the number of teeth in entire dentition  PERM DENTAL FORMULA: I 2/2: C 1/1 : P 2/2; M3/ 3 = 32 TEETH TOTAL  BABY DENTAL FORMULA: I 2/2: C 1/1: M 2/2 = 10 TEETH TOTAL    General Eruption Pattern   Deciduous:   MAND Central incisor   MAND Lat incisor  MAX Central incisor   MAX Lat incisor  MAND 1st molar   MAX 1st molar  MAND canine  MAX canine  MAND 2nd molar  MAX 2nd molar     Decid. Eruption Ages in Months  Central incisor mand = 6  Central incisor max = 7.5  Lat incsor mand = 7  Lat incisor max = 9  Mand canine = 16  Max canine = 14  Mand 2nd molar = 20  MAX 2nd molar = 24       Perm dentition erupt sequence: with ages in years  Mandibular 1st molar = 6-7  Max 1st molar = 6-7  Mand C. incisor = 6-7  Mand L. incisor = 7-8  Max C. incisor = 7-8  Max L. incisor = 8-9  Mand canine = 9-10  Mand 1st premolar = 10-11  Max 1st premolar = 10-11  Mand second premolar = 11-12  Max second premolar = 11-12  Max canine = 11-12  Mand 2nd molar = 11-13  Max 2nd molar = 12-13  Mand 3rd molar =17-21  Max 3rd molar = 17-21      Numbering systems  Universal numbering system   Perm = Upper right third molar is #1 and then you go all the way to number 16. Start the next arch off at lower left 3rd molar = #17 and then lower right third molar = #32  Deciduous teeth = Numbered 1-20 in the same fashion as perm teeth but lowercase "d" is added after the number. Most common, just use letters to address baby teeth, A-T retrospectively.   Palmer notation method  Breaks mouths into 4 quadrants of 8 teeth  1 = C.incis  2 = Lat.incis  3 = canine DDA  4 = 1st PM  5 = 2nd PM  6-8 = 1-3rd molars   Use letters A-E for baby teeth   Signs tell the quadrants   FDI system   Binomial system = the first number = quadrant and se...

Dental Anatomy 1: Classifications of Dentitions, Periods, and Teeth

10 min

Intro  Teeth are seperated into upper and lower arches  upper arch = maxillary and lower arch = mandible  Mandible = lower jar = movable  Midline = imaginary verticle line that divides the mouth into halves  The mouth = further divided into quadrants:  Maxillary upper right  Maxillary upper left  Mandibular lower right  Mandibular lower left   It's improtant to remember that the left is actually the patients right and patients left is actually our right   Occulsion = the action of the mandibular bottom teeth contacting the max. Upper teeth  The process of biting and chewing food = mastication      Classification of Dentitions  Humans = heterodont = meaning we have different types of teeth that have different functions while masticating. A homodont would instead have all one same set of teeth.   Humans are also diphyodonts which means they have two sets of teeth  Deciduous  Permanent  Polyphyodonts = 2+ sets of teeth develop throughout life  Humans have two dentition phases. Deciduous and permnant  Decid = primary dentiton. Erupt around 6 mos till around 2 years old.  20 of them 10 on top 10 on bottom  Perm = 32 perm teeth. 16 on top and 16 on bottom.   and they erupt from 6 yrs old to 21 years old.      Classification of Teeth  Humans have 8 different types of teeth in the perm dentition   2 incisors = closest to ML   Central and lateral incisors  Biting, cutting, incising, and shearing.  4 per arch = 8 total in mouth  1 canine AKA cuspid  3rd tooth from midline  Cutting, tearing, piercing, and holding  2 per arch = 4 total in mouth  2 premolars AKA bicuspids  4th and 5th teeth from ML  1st and second premolars = their names  Tearing, holding, grinding  4 per arch = 8 total per moutn  3 molars  6th, 7th, 8   First, 2nd, and 3rd molars  First molar = 6 year old jmolar  Second molar = 12 year old molar  3rd molar = wisdom tooth  GRINDING  6 per arch, 12 per mouth   Decidio...

–

0 ratings from members

5
4
3
2
1

Rate this podcast

Log in to rate and review the shows you listen to.

No reviews yet — be the first member to rate "Dental School Notes!".

This podcast, its content and its artwork are not owned by, affiliated with, or endorsed by Castquire.

Keep listening

Discover more podcasts like this.

Up next

  1. Nothing queued. Use + Queue on any episode to line it up.

0:00 0:00